Browse Categories

MICROLUBROL™ SYLCAP™ 284-S Silicone Elastomer Encapsulant Kit, Transparent, Optically Clear, 10:1 Mix, 500 Gm/ML (0.5 Kg)


Price: $68.95
In Stock
MICROLUBROL™ SYLCAP™ 284-S Silicone Elastomer Encapsulant Kit, Transparent, Optically Clear, 10:1 Mix, 500 Gm/ML (0.5 Kg), STANDARD Cure Time, Compare to Sylgard 184 and Similar.
Includes everything you need to easily and accurately mix anything between a custom sized small batch to a full 500 grams of silicone elastomer resin.
Heat cure: Curing time at 212ºF is approximately 30-45 minutes (not including recommended one hour standing time at room temperature prior to heating to allow for entrained air bubbles to disappear if not using vacuum debarring).
SYLCAP 284-S STANDARD CURE PROFILE SILICONE ELASTOMER CURING AGENT, 454 Grams in a durable HDPE, wide-mouth jar for easy, accurate and down-to-the-last-drop dispensing with syringe, foil heat sealed in jar for protection until used.
Accurate graduated mixing cup, with Milliliter (ML) and ounce graduations, reusable.
Durable double-ended plastic mixing paddle / spatula, reusable.
Convenient, accurate 20 ML capacity syringe for accurate measuring and dispensing of SYLCAP 284-S ELASTOMER BASE for small batch mixes.
Convenient, accurate 10 ML capacity syringe for accurate measuring and dispensing of SYLCAP 284-S ELASTOMER CURING AGENT for small batch mixes.
Vinyl rubber gloves, latex-free (Large size for true comfortable one-size fits all). Detailed, step-by-step mixing and curing instructions.

Characteristics:
Transparent / Optically Clear when mixed AND when fully cured. Two-part, 10 to 1 mix ratio.
Polydimethylsiloxane (PDMS) silicone based elastomer. Good flow and spreadability when mixed.
Resistant to cold and heat (up to 392ºF, 200ºC). Does not yellow or discolor under UV light. Suitable for room temperature cure OR heat cure.
Room Temperature (72ºF to 77ºF) full cure to approximately 45 Shore A hardness in 24-28 hours. Room Temperature (72ºF to 77ºF) 50% cure to approximately 20-25 Shore A hardness in 12-14 hours.
Made in USA.
Compare to Dow Corning brand Sylgard 184. Standard curing time profile similar to DC 184.
Item Number: MLSC284S
Manufacturer: MicroLubrol
Manufacturer Part No: MLSC284S-500g
Shopping Cart
Your cart is empty.